Electorials
Menu
  • Home
  • Arduino Projects
  • Raspberry Pi Projects
  • General Electronic Projects
  • Product Reviews
  • Contact Us

ZK-UT USB Multi-Function Meter

Module has been kindly sponsored by ICStation.com
Picture

​PRODUCT SPECIFICATIONS

General
Type: USB Voltmeter, Ammeter, Battery Capacity Tester (with a built-in timer), Energy Tester (with a built-in timer), Power Tester, Load Impedance Tester and Thermometer
Architecture: For all electronics
​
Interface Type: USB (Universal Serial Bus)
Display Type: IPS Colour LCD Display
Operating Temperature: 0°C - 70°C
Temperature Measurement Range: 0°C - 80°C
Temperature Measurement Error: ± 3°C
Operating Humidity: 0% - 95% RH
Time Measurement Range (for measuring capacity and energy consumed): 00:00:00 - 99:59:59 (up to 10 hours)
Fast Charge Recognition Modes: QC2.0, QC3.0, APPLE2.4A/2.1A/1A/0.5A, Android DCP, Samsung AFC, Huawei FCP and Huawei SCP
Data Refresh Rate: 2 Hz with a real-time display
​Input Port: Male Type A USB Port
Output Port: Female Type A USB Port
​
Power
Voltage Measurement Range (DC): 3.70 ~ 30 volts
​Voltage Measurement Resolution: 0.01 volts
Voltage Measurement Accuracy: ± (1% + 2 digits)
Current Measurement Range: 0.000 ~ 5.000 amps
Current Measurement Resolution: 0.001 amps
​Current Measurement Accuracy: ± (2% + 2 digits)
Capacity Measurement Range: 0 ~ 99999 mAh
Energy Measurement Range: 0 ~ 99999 mWh
Power Measurement Range: 0 ~ 150W
Load Impedance Measurement Range: 0.5 ~ 999.9 Ω

Weight and Size Dimensions
Product Weight:​ 28g
Product Size (L x W x H): 64 x 22 x 11 mm
Diagonal Screen Size: 0.96"

​PRODUCT REVIEW

This product may be seen as a slight step down from the XY-MUP Module, as it cannot boost nor buck voltages, or the UM24 USB Meter, as this product doesn't have a full colour display with a touch screen and graphing features. However, this module does offer a reasonable amount of features for a cheap price, such as:
1. A clear IPS colour LCD display with a nice selection of colours to highlight the different features well.
2. The ability to display real-time information from all of its features at once without any form of delay or hesitation.
3. A function to easily identify the quick charge protocol (
QC2.0, QC3.0, APPLE2.4A/2.1A/1A/0.5A, Android DCP, Samsung AFC, Huawei FCP or Huawei SCP) which your load is utilising.
4. An extremely affordable price tag of $6.59, which comes with a plastic case and a QR code with instructions for this product.

​ICSTATION PRODUCT PAGE

Picture
​Check out the product here:  http://www.icstation.com/product_info.php?aid=294&products_id=13787

​​​​​For purchases from ICStation, use this code for a discount:
​Code:
 Simics
Discount Amount: 15% off
​Max. Use: 1 (one per user) 
​Amount Limit: 300

Be sure to check out the ZK-UT USB Multi-Function Meter Setup by clicking here.

​​​​ENJOY! CONTACT US FOR ANY INQUIRIES!

Powered by Create your own unique website with customizable templates.
  • Home
  • Arduino Projects
  • Raspberry Pi Projects
  • General Electronic Projects
  • Product Reviews
  • Contact Us