Electorials
Menu
  • Home
  • Arduino Projects
  • Raspberry Pi Projects
  • General Electronic Projects
  • Product Reviews
  • Contact Us

Raspberry pi Dual cooling fan, thermal tape & RAM Copper Heatsink

Kit and Modules has been kindly sponsored by ​52pi.com
Picture

Dual Fan specifications

General
Type: Cooling Fan
Architecture: For Raspberry Pi
Rotation Speed: 7500 rotations/minute
Heat Dissipation/Temperature Drop: 5
°C - 20°C
Power
Operating Voltage: +5 volts
Operating Current: 200 mA
Weight and Size Dimensions
Wire Length: 8 cm

Product Weight: 19g
Product Size (L x W x H): 56 x 24.7 x 12.4 mm

pinout

Red Wire - VCC (+)
Black Wire - GND (-)
Picture

product review

From a maker's point of view, this dual cooling fan is actually a very effective cooling source because of reasons which includes:
1. The additional aluminium heatsink fitted below the dual fan itself, which adds on to the excessive temperature drop it can make.
2. The low current consumption it uses for a major result in cooling the Raspberry Pi.
3. The fact that it has two fans in one product together then having two extra, separate fans which will take up more current and power from your Pi.
4. The sturdy and durable plastic used in making this product which protects it from outside damage.

TheRmal tape cooling kit specifications​

General
Type: Thermal Tape
Architecture: For Raspberry Pi

Power
Not applicable due to the thermal tape not being an electronic device.
Weight and Size Dimensions
Product Weight (Thin Thermal Tape): 1g
Product Weight (Thick Thermal Tape): 7g

Product Size (L x W x H) (Thin Thermal Tape): 55 x 24 x 0.3 mm

Product Size (L x W x H) (Thick Thermal Tape): 55 x 24 x 1.5 mm
Picture

product review

Even though this product isn't very effective in heat reduction, it provides an excellent adhesive between chips and heatsinks. Some of its features include:
1. A very durable adhesive to stick on any surface securely, with ease.
2. The fact that this tape increasingly speeds up heat transfer from the chip to the material above. The thermal tape, furthermore, is an amazing conductor of heat. This factor boosts cooling and heat dissipation as an end result.


Ram coPper heatsink specifications

General
Type: Heatsink (Copper)
Architecture: For Raspberry Pi
​
Heat Dissipation/Temperature Drop: 2°C - 5°C
Power
Not applicable due to the copper heatsink not being an electronic device.
​
Weight and Size Dimensions
Product Weight: 1g
Product Size (L x W x H): 11.8 x 11.8 x 1 mm
Picture

product review

At a first glance, this product may seem very small in size, but it incorporates numerous attributes such as:
1. An effective heat dissipation technology, where this heatsink can enable a user to run a high-powered software with the RAM chip not overheating.
2. The heatsink's size, as it is very small that it can still fit into your Raspberry Pi case with this component on the RAM chip.

52pi product page

Picture
Check it out here: goo.gl/43qTNG

Be sure to check out the setups for these products by clicking here.

​​ENJOY! CONTACT US FOR ANY INQUIRIES!

Powered by Create your own unique website with customizable templates.
  • Home
  • Arduino Projects
  • Raspberry Pi Projects
  • General Electronic Projects
  • Product Reviews
  • Contact Us